|
Product Details:
|
| Application: | Uninterruptible Power Supplies | Mounting Type: | PCB Mounting |
|---|---|---|---|
| Principle: | Null Balance | Standard: | High Precision |
| Product Name: | Hall Effect Current Sensor | Operating Temperature: | -40～+85 |
| High Light: | hall effect current sensor 100a,open loop hall effect sensor |
||
PCB Mount Hall Effect Current Transducer Hall Effect Dc Current Sensor
TBC-P series current sensor is two closed loop device based on the measuring principle of the hall effect,with a galvanic isolation between primary and secondary circuit. It has strong anti-jamming ability and provides accurate electronic measurement of DC, AC or pulsed currents.
| Electrical data(Ta=25℃±5℃) |
|
Type
|
TBC5PS5 | TBC10PS5 | TBC15PS5 | TBC25PS5 | Unit |
| Rated input (Ipn) | 5 | 10 | 15 | 25 | A |
| Measuring range(Ip) | 16 | 32 | 48 | 80 | A |
| Turns ratio(Np/Ns) | 5:1000 | 3:1200 | 2:1200 | 1:1000 | T |
Internal resister |
25±0.5% | 25±0.5% | 25±0.5% | 25±0.5% | Ω |
| Rated output | @ Ip=±Ipn ±0.625±0.5%FS | V | |||
| Size of primary pins | ø 0.6 | ø 0.8 | ø 1.0 | ø 1.4 | mm |
| Supply voltage | ±5±5% | V | |||
| Power consumption | ≤20+Ip/Ns | mA | |||
Zero voltage |
@ Ip=0 ±2.5±0.5% | V | |||
|
Offset drift |
@ -40～+85℃ ≤±0.5 | mV/℃ | |||
| Linearity | @ Ip=0-±Ipn ≤0.1 | %FS | |||
| Total accuracy | ≤±0.7 | % | |||
|
di/dt accurately followed |
＞50 | A/µS | |||
| Response time | @ Ip=Ipn, 50 A/µS ,10%-90% ＜500 | nS | |||
| Bandwidth | @ -1db DC～100 | KHZ | |||
| Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV | |||
Applications
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
| Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
| Directions for use |
When the current will be measured goes through a sensor ,the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor).
Custom design in the different rated input current and the output voltage available.
Standards
| General date |
| Value | Unit | Symbol | |
| Operating temperature | -40 to +85 | ºC | TA |
| Storage temperature | -40 to +125 | ºC | TS |
| Mass(approx) | 12 | g | M |
| Characteristics chart |
Pulse current signal response characteristic Effects of impulse noise
Contact Person: Ms. Suki
Tel: 13951079826
Fax: 86-025-84643985
