|
Product Details:
|
| Product Name: | DC Leakage Current Sensor | Application: | Electrical Power System |
|---|---|---|---|
| Output Mode: | Connector | Operating Temperature: | 40℃~+85℃ |
| Color: | Black | Hole Size: | 200mm |
| High Light: | 200mm Hole Leakage Current Sensor,Electrochemical Leakage Current Sensor,ROHS Leakage Current Sensor |
||
Leakage Detection System DC Leakage Current Sensor High Insulation Between Primary and Secondary Coil
TDC-LTC200 series DC leakage current sensor is a series of new device developed according to principle of electromagnetic induction. high stability when measure the low current (mA level) . It is highly insulating between its primary coil and secondary coil. This sensor is used to measure current of signal system, circuit, and leakage monitoring system, as well as to measure current difference,maily apply to national power system.
Electrical data(Ta=25℃±5℃)
|
Type Parameter |
TDC20LTC200 | TDC50LTC200 | TDC100LTC200 | TDC150LTC200 |
Unit |
|
Rated current(Ipn) |
20 | 50 | 100 | 150 | mA | |
Measure range(Ip) |
30 | 75 | 150 | 225 | mA | |
Turns ratio(Np/Ns) |
1:100 | 1:250 | 1:200 | 1:250 | T | |
|
Rated output voltage |
@Ip=±Ipn ±5±1% | V | ||||
|
Supply voltage |
±12--±15±5% | V | ||||
|
Consumption current |
20+IpX(Np/Ns) | mA | ||||
|
Offset voltage |
@Ip=0 ≤±50 | mV | ||||
|
Offset voltage drift |
@ -40℃～85℃ ≤±1.5 | mV/℃ | ||||
|
Linearity |
@Ip=0-±Ipn ≤1 | %FS | ||||
|
Response time |
≤50 | mS | ||||
|
Galvanic isolation |
@ 50HZ,AC,1min 2.5 | KV | ||||
Applications
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
National power system
Mechanical dimension(for reference only)
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
Directions for use
When the current will be measured goes through a sensor, the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor).
The output amplitude of the sensor can be adjusted according to users’ requirements.
Custom design in the different rated input current and the output voltage are available.
Standards
General date
| Value | Unit | Symbol | |
| Operating temperature | -40 to +85 | ºC | TA |
| Storage temperature | -40 to +125 | ºC | TS |
| Mass(approx) |
349
|
g | M |
Characteristics chart
Characteristic of Output Noise Voltage
Input Current-Output Voltage
Contact Person: Ms. Suki
Tel: 13951079826
Fax: 86-025-84643985
