|
Product Details:
|
| Application: | Uninterruptible Power Supplies | Mounting Type: | PCB Mounting |
|---|---|---|---|
| Principle: | Null Balance | Standard: | High Precision |
| Product Name: | Hall Effect Current Sensor | Operating Temperature: | -40～+85 |
| High Light: | high frequency current sensor,hall effect high current sensor |
||
AC Variable Speed Drives Hall Effect Dc Current Sensor IEC60950-1:2001
TBC-D series multi-range current sensor is a closed loop device based on the measuring principle of the hall effect and null balance method, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.
| Electrical data(Ta=25℃±5℃) |
| Type Parameter |
TBC25D | TBC50D |
Unit |
Rated input current(Ipn) |
25 | 50 | A |
Measure current range(Ip) |
50 | 100 | A |
Secondary turns(Ns) |
1000±1 | 2000±2 | T |
Secondary resister |
40 | 45 | Ω |
| Rated output current(Isn) | @Ip=±Ipn ±25±0.5% | mA | |
Supply voltage |
±15±5% | V | |
| Power consumption | ≤20+Ip/Ns | mA | |
Zero offset current |
@ Is=0 ≤±0.2 | mA | |
Offset current drift |
@ -40～+85℃ ≤±0.6 | mA | |
| Linearity | @ Ip=0-±Ipn ≤0.1 | %FS | |
Total precision |
≤0.7 | %FS | |
di/dt accurately followed |
＞50 | A/µS | |
Response time |
@ Ip=Ipn,50 A/µS,10%-90% ＜1 | µS | |
Bandwidth |
@ -1db DC～100 | KHZ | |
Galvanic isolation |
@ 50HZ,AC,1min 2.5 | KV | |
| Applications |
AC variable speed drives
Static converters for DC motor drives
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Switched Mode Power Supplies(SMPS)
Power supplies for welding applications
| Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
| Pin connections |
| IPN(A) | Iout(mA) | [mΩ] | [µH] | Pin connector | |
| 1 | ±25(±50) | ±25 | 0.18 | 0.013 | |
| 2 | ±12.5(±25) | ±25 | 0.81 | 0.05 | |
| 3 | ±8.3(±16.6) | ±25 | 1.62 | 0.12 | |
| Directions for use |
When the current will be measured goes through a sensor, the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor)
Custom design in the different rated input current and the output current are available.
|
Standards |
| General date |
| Value | Unit | Symbol | |
| Operating temperature | -40 to +85 | ºC | TA |
| Storage temperature | -40 to +125 | ºC | TS |
| Mass(approx) | 10 | g | M |
| Characteristics chart |
Pulse current signal response characteristic Effects of impulse noise
Contact Person: Ms. Suki
Tel: 13951079826
Fax: 86-025-84643985
