|
Product Details:
|
| Application: | Uninterruptible Power Supplies | Mounting Type: | PCB Mounting |
|---|---|---|---|
| Principle: | Null Balance | Standard: | High Precision |
| Product Name: | Hall Effect Current Sensor | Operating Temperature: | -40～+85 |
| High Light: | high frequency current sensor,closed loop current transducer |
||
PCB Mount Hall Effect Current Transformer Ac Current Transducer
TBC-C104/204 multi-range current sensor is a close loop device based on the measuring principle of the hall effect and null balance method ,with a galvanic isolation between primary and secondary circuit .It provides accurate electronic measurement of DC,AC or pulsed currents.
| Electrical data(Ta=25℃±5℃) |
| Type Parameter |
TBC25C104 | TBC50C204 |
|
Rated input (Ipn) |
25 | 50 | A |
Measure range(Ip) |
0～±60 | 0～±120 | A |
Measure resister range |
200～730(±15V) | 54～250(±15V) | Ω |
| Turns ratio(Np/Ns) | 1-2-3:2000 | 1-2-3-4:2000 | |
Rated output (Isn) |
±12.5±0.5%(Ip=±Ipn) | ±25±0.5%(Ip=±Ipn) | mA |
| Supply voltage | ±15±5% | V | |
| Power consumption | 20+IpX(Np/Ns) | mA | |
Zero offset current |
@Ip=0 ≤±0.2 | mA | |
Offset current drift |
@ -40℃～+85℃ ≤0.5 | mA | |
Response time |
@50A/μS,10%-90% ＜1 | µs | |
|
|
@Ip=0-±Ipn ≤0.1 | %FS | |
Galvanic isolation |
@ 50HZ/60HZ,AC,1min 5 | KV | |
| di/dt accurately followed | ＞50 | A/μs | |
Bandwidth(-3dB) |
DC…100 | KHz | |
Secondary coil resister |
200 | 180 | Ω |
| Applications |
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
| Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
| Pin connections |
|
Primary |
|
Rated |
Primary |
Pins connections | |
| TBC25C104 | TBC50C204 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Directions for use |
When the current will be measured goes through a sensor ,the current will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor)
Custom design in the different rated input current and the output current available.
|
Standards |
| General date |
| Value | Unit | Symbol | |
| Operating temperature | -40 to +85 | ºC | TA |
| Storage temperature | -40 to +125 | ºC | TS |
| Mass(approx) | 15 | g | M |
| Characteristics chart |
Pulse current signal response characteristic Effects of impulse noise
Contact Person: Ms. Suki
Tel: 13951079826
Fax: 86-025-84643985
